With the Cotton Pad Germination Method it is very important to use the right type of pads. Learn how to germinate seeds with cotton pads the right way! Cannabis seed germination is the first step of cultivation, and if we make a mistake in this first phase, any subsequent effort will be in vain. There are several germ… Here we tell you how to germinate a cannabis seed with the best possible results. Discover the most effective methods >> Click Here to Read the Article
Cotton Pad Germination Method
Another great way to germinate your cannabis seeds. To be successful with the Cotton Pad Germination method it is very important to use the right type of cotton pads. They can be found in most pharmacies and drug stores.
Don’t use paper towel, toilet paper or any other comparable materials, only the make-up cotton pad retains the right level of moisture to make this method successful.
Germination can take 3-10 days, depending on environmental conditions and variety.
Follow these steps for the Cotton Pad Germination Method, to ensure healthy germination rates of around 95-100% .
How to germinate seeds in cotton pads
Step 1: Collect the correct materials
Here are the five essential materials you will need to proceed with this germination method:
- Cannabis seeds
- Cotton pads
- Water in spray bottle
- Microwave foil with small holes
Step 2: Place the seeds on the cotton pads
Place the cotton pads on a plate (for every 5 seeds you will have to use 2 cotton pads).
Place the seeds on the cotton pad (max 5 seeds per cotton pad) and lay them in a dice formation
Step 3: Spray the seeds and cotton pad with water
Take your spray bottle and put it on fine mist and spray the seeds lightly.
Step 4: Cover the first cotton pad with a second one
Put another cotton pad on top of the seeds and spray again lightly.
Step 5: Place the pads on a dish and cover with foil
Take microwave foil (with small holes – not normal cling film) and secure it tightly over your plate.
Take the plate and put it in a dark place with a constant temperature of around 20 degrees Celsius (a closet in the living room is often a good place)
Step 6: Wait a few days for roots to develop
Wait for 2-5 days (check your plate on day 3) Once the root is between 2-5 cm the newly born seedling is ready to be transplanted into the soil.
Step 7: Prepare the soil and make a hole
Take a pot of minimum 0.25 L and fill it with either Seedmix or Lightmix. Wet the soil and make a small hole in the middle.
Place your setup in a room with stable temperature. 20-25 degrees is ideal. We often advice your living room
Step 8: Place the root inside the hole
Spray again lightly and put the seedling in the hole. Make sure the root goes into the soil and the ‘head’ of the seedling, stays above the soil. Close the hole and move it to a grow room with at least 18 hours of light per day, with a temperature of 20-27 degrees Celsius and a humidity level of around 60-80%. Keep the soil moist daily.
Step 9: Let them grow
Now the seeds will grow further and shed their shell.
WARNING! Always remember: Is the growing medium too wet, your seedling will rot. Is the growing medium too dry, the seedling will dry out, and die down.
Always remember: Is the growing medium too wet, your seedling will rot. Is the growing medium too dry, the seedling will dry out, and die down.
15 Comments . Leave new
I’ve been browsing online greater than three hours today, yet I by nomeans discovered any fascinating article like yours. It’s pretty worth enough for me.In my opinion, if all website owners and bloggers made excellent content
I really loved what you had to say, and more than that, how you presented it. Too cool!
This design is wicked! You definitely know how to keep a reader entertained.Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Great job.
You are my inspiration , I have few blogs and occasionally run out from to post Great article, just what I wanted to find.
Excellent post. I am dealing with many of these issues as well..
You understand thereforesignificantly on the subject of this matter, made me in myview consider it from a lot of varied angles.
Everyone loves what you guys are usually up too.This type of clever work and exposure! Keep upthe very good works guys I’ve included you guys to my own blogroll.
thanks for spending the time to talk about this subject here on your blog.
This is my first time visit at here and i am actually impressed to read everthing at oneplace.
I have just germinated my seeds and noticed the root had grown thru the cotton pad by about an inch. I carefully tried to remove the cotton pad and snapped the root. I managed to plant the seedling in soil but was wondering what chance it had after breaking the root?
This can happen indeed, a lot of the times the seedling will survive if you place it carefully in the soil.
Can you give us an update how yours is doing?
which germination is easier water with cotton or soil i tried water paper towel as instructed got 8 duds
The germination directly into soil is the easiest method! This is the most natural and you do not have to transplant the seedling.
The most common mistakes when germinating cannabis seeds
Germinating the seed is the first step in any cannabis grow. It is the process during which the seed begins to develop, and the radicle emerges. There are several methods of germination and there are a number of common mistakes made in each of them, which can be easily avoided.
Here we explain what not to do during germination in each case, and we tell you that the method recommended by Dinafem Seeds is germination in Jiffy, as it is the simplest and has the lowest error rate.
Mistakes when germinating cannabis seeds in Jiffy
Jiffies are dehydrated peat discs, pressed into a biodegradable mesh which, when moistened, become tiny sacks of earth. Water is usually applied so that the wet discs swell and become mini containers of substrate where you can plant the cannabis seed so that it germinates inside the peat. What could go wrong with this method so that we don’t get to see the seedling emerging from the Jiffy?
- Adding too much water to the Jiffy: the disc must be moistened so that it swells, but it should not be drowned. The goal is to keep the soil in the Jiffy moist during the germination process, but never drowned. Some growers water the Jiffy too much, and more often than necessary, and end up drowning the seed because excessive moisture prevents the ventilation of the seed, stopping its germination.
- Covering the Jiffy so that it is too hermetically sealed: the Jiffy has to be protected, but some people shut it away in a germination greenhouse or Tupperware container with holes, increasing the moisture excessively, which leads to the growth of fungi.
- Burying the seed too deep: The seed should be about one centimetre from the surface. Although it is true that the depth of a Jiffy is not more than 10 centimetres, pushing the seed to the bottom of the Jiffy will make it difficult for the radicle to find its way out into the light. Just insert the seed with your finger, near the surface, and cover the tiny hole made when you insert it.
- Not providing it with the right light intensity: in the first germination stage, when the radicle begins to rise up, it is better to provide too much light rather than not enough, because light does not bother cannabis. Of course, in the case of the Jiffy, we must keep in mind that the light, whether from the sun or a spotlight, is linked to the possibility of drying out. So, even if it is good that the Jiffy has plenty of light, we have to make sure that this is not drying the soil too much.
- Subjecting the Jiffy to changing temperatures: changing the temperature for example from 25 degrees (indoors) to 5 degrees (on a terrace) will make germination impossible.
- Putting several seeds in the same Jiffy: these peat pellets are not big enough for several seeds. We should use one for each seed we want to germinate.
- Keeping the seed in the Jiffy for too long. As soon as the seedling has a pair of cotyledons, it must be transferred to the substrate. The Jiffy is small and can only be used for so long before space must be given to the roots to grow in the pot or in the soil.
Mistakes when germinating cannabis seeds in damp cotton wool or paper
The method of germination in damp cotton wool or paper consists of moistening these materials and wrapping the seeds in them. In this case, it is advisable to put these wet fabrics in a germination greenhouse or Tupperware container with holes for ventilation, so that the temperature remains the same throughout the process. So where could we go wrong in this case?
- Letting the radicle grow too much: if the root becomes too long, it will probably end up getting caught up in the cotton wool or paper and will then break when detached from them before being transferred to the substrate. To avoid this, we need to do two things. First, don’t let the root get too long. As can be seen in the photos, the radicle grows very fast, so we have to put it in the soil when we see that it has grown in a certain direction (we can see that it either grows in a straight line or it adopts a more curved shape). Second, do not use pure cotton wool or kitchen paper, but rather cotton fabrics such as rags or pieces of old T-shirts.
- Exposing the seeds to changing temperatures: if we keep exposing them to different temperatures, seeds will not germinate. We must ensure that the place where we put them is warm, between 25 and 28 degrees Celsius, and that this temperature is kept stable until we transplant them to the substrate.
- Leaving the root in contact with the air for too long: left in contact with the air the root will oxidise, which will in turn kill the plant. When the root begins to grow, it is best to transfer it to the substrate immediately. Or, failing that, keep it well covered with the wet fabric.
Mistakes when germinating cannabis seeds in substrate (in a pot or in the ground)
Planting the seed directly into the pot or the ground where we plan to grow is another option for germinating the seed. Let’s have a look at what is usually done wrong in this case, leading to the cannabis seeds failing to germinate.
- Burying the seed too deep: the seed should be one centimetre below the surface and not any deeper. As a general rule for seed germination and cultivation, it is recommended to plant the seed at a depth equal to twice the size of its diameter. It is enough to cover the cannabis seeds, which are small in diameter, with just a little soil.
- Over-fertilising the substrate: the soil where the seed will germinate should be porous and light in nutrients. The substrate used for a flowering plant is not the best choice to germinate a seed, because a marijuana ‘baby’ cannot assimilate the same amount of food as an adult marijuana plant. So, let’s be sparing with the diet in the soil where we have placed the seed to be ‘born’.
- Using a soil with an unknown composition: the soil from the park near our house, or from the vegetable garden of the house in the village are not the best options for germination. It is important to know the composition of the substrate where we are going to plant the seed. And when we take soil from somewhere else, it may contain many minerals, or many nutrients, or a lot of fertiliser, and if we have not bought it in a bag where its ingredients are listed, we will not know its composition. So, it is important to use a substrate whose composition we know, especially for this first step in growing.
- Watering too much: a substrate that is too wet, especially in the case of autoflowering seeds, can be lethal for germination, and for the seedling’s first few weeks of life.
- Putting several seeds in the same pot: unless it is a very large pot, let’s give each seed its individual space so that the roots have enough room to develop. If we put several seeds in a 14-litre pot, for instance, some seeds may end up hindering the development of the others.
- Planting the seed directly in the ground where the climate is not appropriate: if the weather is too cold, too hot, too dry, or too wet it will be difficult for the seed to germinate. Since we do not control the environmental conditions in an outdoor substrate, changing weather conditions can easily hinder the germination of the cannabis seed.
Mistakes when germinating cannabis seeds in water
This method consists of putting the seed in a container with warm water and waiting for it to germinate in the days following immersion.
- Leaving the seed in the water for too long: as soon as it has germinated, and we see that the radicle has emerged, the seed must be transferred to the substrate. Water can be used to germinate it, but never to grow it. So, as soon as we have achieved the goal of placing it in the liquid, we have to take it out of there and provide it with the substrate it needs to survive.
- Overdoing the dosage of hydrogen peroxide in the water: if you want to include hydrogen peroxide to prevent fungi or bacteria during germination, you have to pay attention to the concentration. Overdoing the amount can prevent germination.
Common mistakes of any germination method
- Breaking the radicle while trying to separate the shell from the bulb. Being very invasive in the germination process can be lethal to the seed. Once it has germinated, the seedling will generally eject the seed shell itself, so we should leave the seed to do its job. We recommend intervening only if it is really necessary, and we see that the plant is growing upwards and that the shell is still attached to some of its parts.
- Handling the seeds, radicles or seedlings with dirty hands. We don’t know what type of dirt we might be carrying on our hands without realising it, so we should always wash our hands before carrying out any of the germination processes. This hygiene also applies to each of the tools that are in contact with the seed during the germination period.
- Using dirty water. It is important to use clean tap water at all times.
If you have made other mistakes not described in this post, please share these in the comments section. The growing experiences of some are usually useful to others.
And please, don’t hesitate to ask us any questions you have about cannabis seed germination.
Jásminka Hi, I’m Jásminka, from Dinafem Seeds, and I spend the whole day surrounded by Dinafem Girls. I’m an eager journalist, who lives with the phone glued to my hand, always trying to keep up with the frantic pace of the cannabis world. When something grabs my attention: I ask, listen, write and tell you all I find out on this blog.
- Cannabis activism
- Hot news
- Cannabis Genetics
- Cannabis Growing
- Growing techniques
- Trimming techniques
- Biological prevention
- Organic Growing
- Indoor Growing
- Outdoor Growing
- Grow Reports
- Nutrients and fertilizers
- Medical Cannabis
- Weed Recipes
- Risk reduction
Most popular posts
Can marijuana lead to addiction?
Differences between cannabis and hemp
Cannabis types and varieties
Don’t miss any posts!
Subscribe to our newsletter and stay up-to-date with the latests cannabis news.
How to germinate a cannabis seed: the 3 benefits of cotton germination
No academic discussion about the many existing methods. Here we tell you how to germinate a cannabis seed with the best possible results
The seeds contain life, a draft, but still a life!
There are more and less effective methods to germinate cannabis seeds, it depends on many factors. Surely each method has its advantages, the most important thing is to understand exactly how to achieve your goal.
Knowing how to germinate a cannabis seed means that by taking care of it, those sketches of life could become plants, perhaps dwarf autoflowering plants or one of the thousand other varieties … who knows!
We at the SensorySeeds blog always want to remind readers that in the UK it is not allowed by law to germinate marijuana seeds. Here, marijuana seeds online are only sold to be collected.
PSYCHO XXL AUTOMIX
However, in countries where they are allowed to grow, manufacturers don’t care whether they are fast flowering seeds, autoflowering seeds or feminized seeds: they just have to be quality seeds, like bsf seeds.
Then you will apply some tricks to make sure you get the best result from your work and then the benefits of cotton germination come into play. With the right method even a beginner can succeed during the first attempts.
How to germinate a cannabis seed using cotton balls
Let’s talk about the various phases immediately. The different steps will help to understand how to germinate a cannabis seed and what strategies to adopt to obtain a healthy and robust plant.
The advantages of the cotton method are: maximum simplicity, economic saving and the guarantee of achieving the best result.
The only things you need are:
- Cotton balls
- Two cooking dishes
- A nebulizer spray
- Quality seeds
The cotton balls keep the seeds moist, but also protected and these are the most important characteristics for a method that must guarantee germination.
For any type of seeds: fast bsf seeds, dwarf auto flower seeds or other fast flowering strains, the story is the same.
By using napkins or handkerchiefs, there is the risk of throwing everything away. But let’s see the procedure:
- Firstly, you have to take a couple of those cotton balls and put some seeds between them.
- Then, it is necessary to moisten them with the nebulizer spray for plants. They must not be completely soaked in water, for this reason it is recommended to spray them.
- The balls are placed between two dishes, or you can use a bowl by turning it upside down, it’s always better to avoid plastic.
- It is necessary to have a constant temperature, around 20 ° (Celsius), but it is not at all advisable to leave the seeds on windowsills and balconies.
- Within 4-5 days the seeds should begin to open and a little root may appear.
As promised, it is a super easy method that can be applied by anyone. It is also advantageous because it’s cheap, given the few tools that are needed to implement it.
Furthermore, the germination guarantee of this method (if quality seeds are used) allows you to save money that would otherwise have to be invested again.
Some tips to encourage the germination of cannabis seeds
This method is one of the most common. Even in the first years of school, the teachers let children do the germination cotton experiment.
The most important thing is to use the same cotton as that of the balls that are produced for cosmetic use, because it is thanks to that material that the seeds maintain the right level of humidity. The correct one for germination.
Anyway, when does the next stage begin? Only when the size of the precious embryo will be 3-5 mm. In any case, it is better not to let the roots grow too much.
Once you understand how to sprout a cannabis seed and after having implemented the right procedures, you will have to provide the perfect environment in which the seed will be grown. The environment that is offered to the seed to grow plays a decisive role.
Before moving the seeds into the ground, to take them from their “cradle”, it would be a good idea to equip yourself with tweezers: buds are delicate.
Therefore, since the seeds can be easily damaged and the roots are fragile, avoiding clumsy mistakes (such as tangling the roots or dropping them who knows where) you can proceed with the transport to the ground.
If it’s clear how to germinate a cannabis seed: that’s it!
Natural cannabis seeds, fast seeds, feminized seeds BSF and many other products from the SensorySeeds online shop, are high quality collectible products.
Many online cannabis seeds are easily found, but not every shop can guarantee products that will keep for a long time and in the best way, if stored correctly in the most suitable place.
SensorySeeds shop collaborates with Bsf, one of the best seed banks for passionate collectors.
However, to those who will be able to legally test the method, we wish: good germination!