Best Way To Germinate Weed Seeds Reddit

ILGM

Buy Cannabis Seeds Online

Learn how to germinate marijuana seeds on your FIRST try! Reach 100% seed germination rates by using our step-by-step tutorial. Just when we thought we'd seen all the weird gardening hacks … The most known methods to sprout your seeds and get your grow cycle going in no time.

How to Germinate Cannabis Seeds

An in-depth guide on how to germinate cannabis seeds. Discover different techniques on how to germinate marijuana seeds to ensure a successful cannabis crop.

Everything has a beginning.

Cannabis seeds, like all seeds, must undergo the germination process before it can grow into a weed-yielding beauty.

Countless cannabis germination guides litter the internet. However, none go as in-depth as our seed germination tutorial. Read along to learn how to germinate marijuana seeds like a pro.

You’ll discover everything you need to know about the art of germinating marijuana seeds. From the necessary equipment to different germination methods and everything in between, we’ve got you covered.

The Chemistry Behind Cannabis Seed Germination

Cannabis seeds require the right conditions to sprout.

Without the proper temperature, moisture level, or oxygen saturation, weed seeds will not germinate. Although you can readily germinate seeds outdoors, nothing beats controlled germination indoors.

Let’s take a look at the three primary elements that influence the germination rates of marijuana seeds.

Water

Water is the key player in the process of germinating marijuana seeds.

The outer-layer of the cannabis seed acts as a protective casing that provides a two-fold defense — prevent damage to the inner embryo and prevent minimal moisture from premature germination.

However, if the marijuana seed is saturated with water, it will eventually absorb the moisture and kick-off the germination process.

Oxygen

Once the embryo activates through water saturation, it requires oxygen to jump-start the respiration process. Oxygen fuels respiration, which unlocks food stored within the embryo.

Energy

After the respiration process, the embryo consumes the food stores, which in turn produces energy. Energy is the necessary product that propels the germination stage onwards.

Warmth

Even if cannabis seeds have access to water, oxygen, and energy, it’s all for nothing unless it has access to warmth.

As long as cannabis seeds experience 72-78°F during the initial germination process — they’ll burst forth from the ground and spread their primordial leaves under the sun or artificial light.

The three most important elements for successful weed seed germination

Why It’s Important to Germinate Weed Seeds Indoors

At its core, the germination process lays the foundation of cannabis plants.

Overall, marijuana plants will underperform without proper germination techniques compared to those that experienced ideal conditions during the germination process. Therefore, it’s always best to harness an indoor environment when germinating marijuana seeds.

What to Look For Before Germinating Marijuana Seeds

Before you begin the germination process, there are a few things you must look for.

Let’s take a brief look at each.

Damaged Marijuana Seeds

Ordering feminized or autoflowering cannabis seeds online is the best way to acquire top-shelf genetics.

The seeds, however, may experience a few bumps on the road during the shipping process. With this in mind, you must look over each seed to ensure there isn’t any damage.

As long as each weed seed is undamaged, the germination process will be smooth.

The Cannabis Seed’s Age

Next, it’s a good idea to write down the date on each seed pack once received.

By doing so, you’ll have a clear understanding of a seeds’ age. Like all things, cannabis seeds lose their luster as the years go by. Cannabis seeds may remain viable for decades. However, germination rates decrease over time.

Therefore, you should only germinate seeds that are properly stored for a maximum of 6-months.

The Cannabis Seeds Color

Lastly, you must check the cannabis seed’s color.

Cannabis seeds come in different sizes and exhibit various markings across the outer seed coat. However, the seed’s color is an excellent indicator that represents seed maturity.

In other words, light green to pale white seeds are immature and are likely unviable. Therefore, always make sure that your cannabis seeds are light to dark brown color before germination.

Take a close look at the seeds that you receive for damage or discoloration

Should You Use a Seedling Heat Mat?

Many new cannabis cultivators ask if they should incorporate a seedling heat mat into the equation.

Although seedling heat mats are excellent tools to ensure fast germination, they are not always necessary. Seedling heat mats work by producing a gentle warmth that won’t rapidly dry cannabis seeds during the germination process.

However, they may be overkill if you utilize them during hot days, such as those during the summer months. Alternatively, they are essential during colder months during the winter. Therefore, you can choose to harness a seedling heat mat based on the time of year that you choose to germinate marijuana seeds.

Three Easy Methods To Germinate Cannabis Seeds Indoors

Now that you have a broad understanding of germinating marijuana seeds let’s get some weed seeds poppin‘ with a few different step-by-step tutorials.

You’ll have a better idea of which germination technique to choose once you’re done reading this section.

1. How to Germinate Marijuana Seeds in Soil in Five Easy Steps

If you want to germinate weed seeds au natural — there’s no better option than using soil.

Here’s a list of what you’ll need to germinate cannabis seeds in soil:

  • Feminized or autoflowering cannabis seeds
  • Eco-friendly “starting” container
  • Soil
  • Water
  • Label
  • Heat mat (optional)

As you can see, the list above isn’t extensive in the least. In other words, germinating marijuana seeds in soil is incredibly affordable.

Step One

First, fill an eco-friendly starting container with soil.

The golden rule? Don’t pack down the soil. Remember, the soil you choose must exhibit a loamy consistency. Hardpack soil does not allow proper water drainage and oxygen circulation, which, as you learned previously, are critical components for the seed germination process.

Furthermore, if you choose to use a heat mat, place the eco-friendly containers on top to warm the medium adequately.

Step Two

Label each container.

The last thing you want to do is forget what seed you placed into each container — especially if you’re germinating multiple cannabis strains at once.

Step Three

Now, it’s time to sow the cannabis seed.

Create a small hole that’s roughly 0.25-inches (6mm) deep. Gently place the seed inside the hole and cover it. It does not matter which direction you put the seed — believe us when we say that the seed and gravity will sort things out.

It’s important to note that each eco pot should contain a single cannabis seed.

Step Four

Gently pour a small amount of water into the area where you buried the cannabis seed.

At this point, you must ensure that the cannabis seed never dries out. Once the germination process begins — there’s no turning back. Therefore, allowing cannabis seeds to dry will guarantee inadequate germination or premature death.

Ultimately, you must monitor the soil and continuously apply water until the seed sprouts.

Step Five

The final step is patience.

The moment the seed is planted, most beginners ask: how long does it take to germinate cannabis seeds, or how can I germinate my seeds fast?

Healthy cannabis seeds typically break the surface within 2-4-days. Older seeds, however, may take upwards of 12-days to sprout.

The germination phase is an incredibly vulnerable moment for cannabis seeds. Therefore, Do notwe repeatdo not dig up the seed to “check on it.”

This is what you can expect after you successfully germinate your cannabis seeds in soil

2. How to Germinate Marijuana Seeds Using Paper Towels In Five Easy Steps

One of the most popular germination techniques is the paper towel method.

Here’s a list of what you’ll need for this low-budget method:

  • Feminized or autoflowering seeds
  • Dinner plate
  • Paper towels
  • Spray bottle
  • Labels
  • Heat mat (optional)

Now that you’ve gathered the necessary supplies let’s get crackin‘.

Step One

Place two to three sheets of paper towels on top of a clean dinner plate. If you decide to use a heat mat to increase the temperature, place it under the dinner plate.

Step Two

Label the dinner plate with the name of the cannabis strain of choice.

Step Three

Place up to 10-seeds per plate.

You must make sure that a minimum of 1-inch adequately separates the seeds.

Step Four

Spray water on the seeds until the paper towels are completely saturated. Once done, place a new layer of 2-3 paper towel sheets on top of the seeds. Use the spray bottle to soak the new paper towel addition.

See also  How Often Do You Water Your Weed Seeds

Remember: the paper towels must always remain saturated with water. If allowed to dry, the cannabis seeds will fail to germinate.

Step Five

The germination process should occur within 24-48-hours. After 48-hours, gently peel back the upper paper towel section. If the seeds germinate, you will see cracked-open seeds with an emerging radicle.

At this point, it’s time to move the germinated seed to its new home with a pair of tweezers. This final step requires extreme care because the radicle is fragile, and if broken, the embryo within will die.

Be careful when you use the paper towel method and make sure to label each plate

3. How to Germinate Marijuana Seeds Using Rooting Cubes in Five Easy Steps

Germinating weed seeds with rooting cubes is the ideal method for beginners and professionals alike.

Overall, rooting cubes provide the ease of the paper towel method and the soil technique’s efficiency. Let’s take a look at everything you need to when germinating marijuana seeds with rooting cubes.

  • Feminized or autoflowering seeds
  • Rooting cubes
  • pH 6.0 water
  • Rooting tray
  • Labels
  • pH meter and pH up or down
  • Heat mat (optional)
Step One

First and foremost, place the rooting cubes in the rooting tray. If you decide to use a heat mat, place the tray on top.

Step Two

Next, label each rooting cube or tray with the appropriate name of each cannabis strain.

Step Three

Use a pH meter and pH solution to achieve a pH of 6.0.

The amount of water you pH depends on the number of rooting cubes. Start with one cup of water if you are germinating less than ten seeds.

Germination cubes require a pH of 6.0 because they are typically made from peat moss, rockwool, or other soilless-based mediums. Therefore, a pH of 6.0 will ensure the best possible results once the seed germinates.

Step Four

Each rooting cube is equipped with a pre-made hole.

Place one cannabis seed per hole. You may tear off a small piece of the substrate to cover the opening. Once done, saturate the rooting cube with pH 6.0 water.

You must make sure that the rooting cube never dries out. Remember, cannabis seeds must remain moist until they sprout to the surface.

Step Five

Once again, patience is the final step when you learn how to germinate cannabis seeds with rooting cubes. Overall, cannabis seeds may emerge from the rooting cube within 2-4-days. However, germination may take as long as 7-days.

There are a lot of rooting cubes to choose from, but the germination process remains the same

How to Germinate Old Cannabis Seeds

Now that you understand how to germinate healthy cannabis seeds let’s quickly discover how to germinate old marijuana seeds.

As you become infatuated with the world of cannabis, you’ll soon begin to stack an extensive seed collection. Don’t worry; we’re all seed hoarders at heart because there are so many incredible cannabis genetics out there.

Eventually, however, you’ll notice that you have more than a few old cannabis seeds. Luckily for you — all is not lost.

Here’s our tried and true technique to give your old seeds a boost during the germination process.

Cannabis Seed Scarification

Scarring cannabis seeds is incredibly simple.

All you need is a nail file or a piece of sandpaper. Use the file or sandpaper across the surface of the seed in question. You do not need to use an immense amount of force, but instead, a few good scrapes to scar the seed’s outer shell will do.

The point of seed scarification is to allow water to penetrate the seed coating easily. By doing so, the embryo receives a jump start that initiates the germination process.

Once the seeds are scarred, you may choose one of the three above mentioned techniques to complete the germination process.

A few readily available tools to get your cannabis seed scarification done

The Best Way To Germinate Marijuana Seeds

Now that you’re done reading this guide on seed germination — which method will you choose?

The soil, paper towel, and rooting cube methods are all tried-and-true and provide excellent germination rates. Remember, cannabis seeds are an investment, and you must use the best germination method possible to ensure a healthy cannabis crop.

You have one chance to germinate each seed the right way, and by using this guide, you’ll make each seed count.

The weird method Redditors are using to germinate seeds

At one point or another, every gardener has found themselves late on starting their seeds. Whether you’re a beginner at gardening or just having a year when everything has been a bit overwhelming, not planting the seeds of your favorite vegetable on time can be frustrating. That’s where Reddit comes in. Reddit gardening has taken off recently, in large part due to the discovery that you can germinate seeds in the Instant Pot (you know, that thing in your kitchen you use to make stews and rice).

The Instant Pot method

The Instant Pot method involves placing your seeds in the Instant Pot on the yogurt setting. It can be credited in large part to a scientist in Ottawa who, during the 2020 growing season, found herself unable to find seeds until it was well past time to germinate them. Now, could a regular gardener have figured this method out? Perhaps. But for scientist Lyanne Betit, this was a no-brainer.

Thanks to her knowledge of organic chemistry, biochemistry, and gardening, Betit came up with the idea to jumpstart her seeds’ germination in the Instant Pot. She was already behind on the growing season and needed a way to speed things up. Knowing that seedlings in warmer climates can thrive in 89° to 91° F. (32 to 33 degrees Celsius), Betit knew the yogurt setting on the Instant Pot was the perfect consistent environment to encourage seed sprouting.

The Instant Pot method works best for warm weather crops like tomatoes, peppers, and cucumbers. It can be especially helpful if you’re behind on the season like Betit, or if you just want to speed up the initial germination process. For those who don’t have a lot of surface area to dedicate to germination, the Instant Pot method is perfect.

How it works

Thanks to the Reddit gardening community, we have a good idea of how this method works. You start by placing the seeds between layers of damp paper towels and putting them in a Ziploc bag. The Instant Pot is turned on and set to the yogurt setting, then the Ziploc(s) with the damp paper towels and seeds is placed inside. There are some seeds that need a slightly cooler temperature and won’t do well inside. Betit discovered you can place these seeds in a Ziploc bag on the lid of the Instant Pot instead. It’s a cooler temperature than inside but is still consistent enough for seeds to germinate.

Why is this possible?

Gardeners often germinate seeds indoors so the seedlings are a good size for transplanting when the outdoor growing season begins. Because seeds require a steady temperature within a set range to germinate and thrive, the Instant Pot provides that environment. It’s warm, void of any drafts, and is a controlled environment — similar to a greenhouse, if you will, but on a smaller scale.

Depending on the seed, the consistent environment is able to help seeds germinate from one to seven days. This method, however, isn’t recommended for cool-weather crops like the Brassica family (cabbage, cauliflower, broccoli, etc.) because the environment will be too warm for them to thrive and survive.

You can try it at home, too!

If you have an Instant Pot, try this method at home! If you’re unsure of the temperature your seeds need to germinate and the packet doesn’t say, the University of California Agriculture and Natural Resources has compiled a list of of ideal seed temperatures. To successfully execute Reddit gardening’s Instant Pot method, you’ll need:

  • Your desired seeds
  • Paper towels (dampened)
  • Ziploc bag(s)
  • Sharpie (to mark what seeds are in which bag if germinating more than one type)
  • A strainer
  • Potting containers for germinated seeds
  • An Instant Pot (but of course!)

A step-by-step guide

Starting the Instant Pot method may feel a bit weird at first, and you might not get it right the first try. Here’s a step-by-step guide you can follow to help execute it as best you can:

  1. Make small piles of four to five seeds and dampen one paper towel per pile (so, if you have three piles of seeds, you’ll need three damp paper towels).
  2. Place the seeds one inch apart on the bottom half of each paper towel, leaving room for roots to sprout.
  3. Fold the paper towel in half and place it inside the Ziploc bag. You’ll want one bag per set of seeds, making sure to label each bag with the plant type.
  4. Pour half a cup of water into the Instant Pot. The water will keep the Instant Pot from burning the bags, as well as help create a warm, humid environment for the seeds. Place the strainer inside.
  5. Set the Instant Pot to the lowest temperature possible on the yogurt setting. This should be 91° F. Set the Instant Pot for the max time available for your version, which will be anywhere from eight to 99 hours.
  6. Place the Ziploc bags into the strainer (stacking is OK!) and put the lid on the Instant Pot.
  7. Be sure to check on your seeds two times a day after the first day, as some may germinate faster than others (especially if they’ve been bought recently or have a softer coating). A majority of the seeds will germinate within a week, and you’ll know they’re ready to be transplanted to potting containers when the tiny white root sprouting from the seed is one to two inches long.
  8. Be mindful of mold. When you check on the seeds, examine the paper towels to make sure there’s nothing fuzzy growing. Because it can be taken care of in its early stages with a mix of water and hydrogen peroxide, you don’t want to let the mold get out of hand and ruin your germination.
  9. The seeds should be removed once they’ve germinated using a sanitized pair of tweezers. Grab the body of the seed (taking care not to touch the root) and transfer them to a pot with soil. Make a small hole in the top of the soil, place the seed in with the root pointing down, and bury only the white root, leaving the body of the seed above the soil. Give it a tablespoon of water.
See also  Cannabis Seeds Ann Arbor

Once germinated and planted, seedlings will need around 12 to 16 hours of light a day. If you don’t have access to this amount of light naturally, be sure you have some grow lights on hand! Thanks to Reddit gardening, seeds all around the world may germinate just a little bit faster from here on out.

Germination Guide for Autoflowering Seeds

Seed germination is the first part of a successful grow cycle, to help you start your cannabis plants with the right foot, here’s an autoflower germination guide that can be used not only for cannabis but for tomatoes, mangos, strawberries. you name it!

Sebastian Good is talking about the best way to start your autoflower seed and germinates Strawberry Pie Auto.

So here’s how to germinate cannabis seeds with the best-known methods and a couple of tips that will get you harvesting in no time.

1. First Things First: Know the anatomy of your cannabis seed

The process of autoflower germination can take up to 10 days, in order to do everything correctly and know if everything’s going well, we need to know a little bit more about the seed. First of all, we need to understand the anatomy of a cannabis seed. The cannabis seed has a dark brown, hard, and often striped, shell, this shell is what protects the insides which are extremely fragile.

When germinating, we need to hydrate the seed, this will soften the seed’s shell and allow water to reach the embryo, when the water reaches it, the embryo will “activate” and start developing.

Have in mind that it’s possible to drown the seed, so we need to keep an eye on moisture levels, also making sure it doesn’t dry out. With a softened shell, it will be easier for the radicle to come out and this is when you’ll see the white taproot slowly appearing, and once it reaches 2-3cm, it’s time to plant it.

As soon as the seedling comes out of the medium, you’ll often see the shell stuck on top of the cotyledons, which are the tiny round leaves that you’re able to see once the shell has detached from the seedling. Those leaves are responsible for feeding the plant until the first set of true leaves appear. Also, there isn’t the best way to germinate marijuana seeds, you can do it any way you want, as long as you keep proper conditions, your seeds will germinate. So, if you’re wondering how do you germinate autoflowering seeds? Read along for the best methods.

2. The Best Conditions For Germinating Seeds

As you may know, cannabis plants need certain conditions depending on the stage they’re in, maintaining these conditions are the best way to ensure your plants will thrive, and when talking about seeds and germination, it’s no different.

Obviously, you can grow cannabis plants in less-than-ideal conditions and they will still grow but it may end up affecting the yields or quality of your harvest.

When talking about germinating auto seeds, germinating in less-than-ideal conditions will decrease the chances of sprouting, so unlike growing cannabis in bad conditions, which will still grow but can affect the harvest, germinating in bad conditions can end up killing your seeds. So when germinating autoflowers you should keep the temperature between 21-26°C and the humidity as close as 90% as you can.

3. Top Tricks For Germinating Old Seeds

As said above, germinating in the ideal conditions will guarantee successful germination but sometimes seeds may be old or have been kept in bad conditions and can be hard to germinate. So, to help you germinate old seeds, here are a couple of tricks that will increase the chances of germination. But first of all, you need to know the best conditions to avoid these problems.

How To Properly Store Seeds

If you are storing seeds for your next grow cycle, you need to keep them in ideal conditions. If you’re going to germinate them during the next couple of days there’s no need to do anything extra, other than keeping them in a cool place and in complete darkness but if you’re planning to store them for months or even years, you should keep them in the fridge.

You should keep your seeds in an airtight container in a fridge set at 6-8°C with a relative humidity of between 20-30%, if you can’t set your fridge to the temperatures mentioned, just keeping them in the fridge will increase the chances of germination. Just have in mind that the better the conditions, the longer your seeds with last.

Soak in supplemented water

As cannabis seeds get old, the shell hardens and can make it hard for the water to reach the embryo, and if the water doesn’t reach the embryo, your seeds won’t sprout so if you’re dealing with old seeds, you can soak them in supplemented water.

To do this, you can fill a glass cup with water and add around 30ml of hydrogen peroxide and leave your seeds soaking for 12hs, this should do the trick. You can also use germination boosters that you find in grow shops but usually, hydrogen peroxide works, also, make sure the water is around 22°C and it’s not getting direct sunlight.

Scarification

Scarification is a method used to make ridges on the seed to help water pass through, to do this properly, you will need a piece of sandpaper but you can improvise and do it with a matchbox. The goal is to thin out the shell so that the water can reach the embryo easily, just make sure you don’t overdo it and end up harming the embryo inside.

Slightly Open The Seed

As you may have seen, the seed is made out of two halves and has a ridge around it, if your seeds are old, that ridge may end up hardening too much and the seed won’t sprout. So to help your weed seed germinate, you can use a knife or any other tool with a thin point to gently insert it in between the ridges and slightly separate it, after this process, you can soak your water and germinate it like you normally would.

4. Paper Towel Germination Method

The paper towel method is the easiest of all methods. You’ll need :

  • 2 paper towels
  • a plastic container or plates
  • water
Step 1

Moisten the paper towels and wring them out so they’re damp but not completely wet.

Step 2

Place the seeds on the paper towel, fold it over the seeds and place it in a plastic container, cover it with the lid to keep moisture in (can also use two plates instead of the plastic container, place the paper towel on a plate and use the other one to cover).

See also  Can You Eat Cannabis Seeds
Step 3

Place the container in a slightly warm and dark place. Remember to check on it daily, we must ensure the paper towels never dry out, the seeds need to keep absorbing moisture, it’s likely that the seeds will never germinate if they don’t. Sprinkle a little bit of water if needed, you’ll know they’re ready to be transplanted when the radicle is around 1-3cm long.

If the paper towel starts having a bad smell, it’s a sign of too much water, let it dry for a couple of days, and if the papers continue smelling bad, change the paper towels.

5. Soaking Overnight In A Glass Of Water

After many years of experimenting and looking for the best way to germinate our Fast Buds seeds, we must say that this is definitely one of the most effective ways.

This method is especially effective for seeds with a harder shell or older seeds. You’ll need:

Step 1

As the title says, grab a glass cup and fill it half with water.

Step 2

Place the seeds in the glass and leave it in a dark place, let the seeds soak for up to 32 hours.

Step 3

Most viable seeds will sink after a couple of hours and you should see the radicle after a couple of days. Remember that some seeds may need longer until you see the radicle coming out. If they haven’t sprouted after 72 hours, add a few drops of hydrogen peroxide to kill accumulated bacteria in the water and return to the darkness for 2 more days.

6. Using A Germination Chamber

When you get a bit more experienced, you’ll wanna look for more professional tools and the germination chamber is one of them. It consists of a plastic base with small square cells (can come with up to 256 cells, each cell supports 1 seed), on top of a heat mat, also comes with a humidity dome, basically looks like a small greenhouse. They’re very cheap and you can make one at home.

The chamber can be used with any type of medium, Rockwool cubes, peat pellets, coco fiber, perlite, or even soil and they keep the best environment for sprouting seeds and the first days of the seedling.So how to germinate a marijuana seed in a germination chamber? To start germinating, make a small hole (1-2 cm) in moisten medium, cover without applying pressure, turn on the heat mat and spray the humidity dome, it should take a couple of days to see the seedling coming out.

7. Rockwool Cubes And Peat Pellets

Rockwool cubes are small cubes made of rock and sand fibers, with the consistency of cotton candy almost, they absorb a lot of water and usually are used for germinating seeds and clones. Using them along with the germinating chamber has an advantage, being easy to transplant to the next medium or container.

Rockwool and peat pellets are an easy way to germinate seeds but can be easier to overwater your seeds.

They also can be used along with clay pellets in hydroponics. One of the bad aspects of Rockwool cubes is you can easily overwater and get root rot. Peat pellets are similar to the Rockwool cubes but are made of compressed peat moss and come in a small disc shape. To germinate in either one of them, we will use the same technique explained before, moisten the Rockwool or peat pellet, make a little hole (1-2cm) and place the seed inside, cover it gently without applying pressure and you’re all done. You can place the pellet or cube directly in any type of medium or hydroponics chamber, after sprouting, the roots will continue to grow down, even if they reach the end of the Rockwool or peat pellet.

8. Planting Directly In Medium

Sometimes the simplest way is the better way. As it happens in nature, we can also sprout our seeds in our medium of your preference (coco, soil, perlite, etc..) Just grab a pencil, or even with your fingers, make a little hole (1-2cm deep), and place the seed in it, the medium must be moist but not soaking, then cover with soil without applying pressure.

Every time you transplant a seedling, it needs some time to readjust and can cause stress, thus one of the biggest benefits of this method is you don’t have to worry about damaging your seedling when transplanting or shocking it because it already is in its final place.

9. Top Tips to Improve Seed Germination

Planting the Seeds Correctly

Cannabis seeds have an oval shape with one of the ends being sharper while the other has an indent known as the crown. When germinating cannabis seeds, it’s recommended to plant the seed with the crown pointing upwards as this is the end where the cotyledons usually come out from.

Don’t Let the Substrate Dry Out

The germination process relies on moisture to activate the biological processes that provide the energy the seedling needs to break through the seed shell and start growing. This means that the more moisture absorbed, the better. Note that the keyword here is moisture, you definitely don’t want to drown your seeds. Anyway, once the seed is in the paper towels and the germination process has begun, make sure to check regularly to ensure it’s still moist, and to help with this, it’s recommended you keep it in a warm damp place.

For better germination rates, you can opt for a heating mat and/or germination chambers, but it really doesn’t matter if you’re germination your seeds in the soil, jiffy’s, Rockwool cubes, paper towels, etc… Make sure to keep the substrate moist and you will have great results.

Planting the Seed at the Right Depth

One of the bigger issues among beginner growers is planting the seed at the right depth. These problems can get worse if you are watering the substrate after the seeds are planted. Remember, burying the seed too deep can cause it to not develop while not burying deep enough can cause the taproot to over-bend and develop a weak stem, and sometimes stunt growth.

This is why we recommend burying the seed at around 2 cm deep. You can do this by using a ruler, marking the 2 cm mark on a straw, or any other utensil that allows you to do this. Then plant your seed and cover it with the substrate without pressing too hard.

Avoid Planting several Seeds in the Same Pot

Sometimes you may not have enough substrate or pots, typically, this is when you would plant multiple seeds in the same container but they usually do not develop correctly due to several reasons. Now yes, you’re saving space and substrate but you’re definitely not helping your plants thrive as first of all, the roots need enough space to grow, and germinating in the same pot can cause the roots to fight for space.

Apart from fighting for space, if all the seedlings make it to the vegetative stage, they will continue competing for light and by doing this, you will not get the most out of each plant. Lack of light can also cause the stem and branches to grow weak which can cause problems during flower so make sure to plant one seed per pot unless you’re growing in 100-200L or bigger raised beds.

10. In Conclusion

There’s no such thing as the best way to germinate marijuana seeds, a successful germination is considered when you see the first leaves, known as Cotyledons, cannabis seeds germinate correctly with relatively high temperatures and humidity. To successfully reach the flowering stage you’ll have to use different techniques, not only for sprouting but to keep the plant happy and healthy until harvest.

Whether deciding which germination method to choose or getting ready for your first successful grow setup, our advice for beginner growers will be to start with autoflowering strains. If you look for something easy, quick, and easy to maintain, like Zkittlez Auto and Gorilla Glue Auto, there’s nothing better than choosing to grow autoflowers.

first time ever growing and got some amazing colors from this strain with low temps ran it at about 58-64 for 2 weeks and got this color

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.